Solution for QID #66953: Always ground or discharge yourself before touching any part | StudyHelpMe

Always ground or discharge yourself before touching any part of the computer * a. People b.Equipment c.Environment     Be careful with the tools that may cause a short circuit * a.People b.Equipment c.Environment   Always pull the cable connector on the handle and not on the cable itself. * a.People b.Equipment c.Environment     Use only rubber shoes when standing on the ground or in a concrete floor * a.People b.Equipment c.Environment     Make sure that the pins are properly aligned when connecting a cable connector * a.People b.Equipment c.Environment     Always power off and unplug the computer before working on it * a.People b.Equipment c.Environment   Take away any liquid such as mineral water or soft drinks near your working area or near computers. * a.People b.Equipment c.Environment   Contingency measures during workplace accidents , fire and other emergencies are recognized. * a.People b.Equipment c.Environment   Personal protective equipment is correctly used in accordance with organizational procedures and practices * a.People b.Equipment c.Environment   Hazards/risks in the workplace and their corresponding indicators are identified to minimize or eliminate risk to co-workers, workplace, and environment. * a.People b.Equipment c.Environment     Take necessary precautions to protect the component of the computer from damage caused by electro static Discharge(ESD) * a.People b.Equipment c.Environment     Hold the components by edges and do not touch the IC's. * a.People b.Equipment c.Environment   Read and follow instructions on the manual carefully. * a.People b.Equipment c.Environment   Do not use excessive force if things do not quite slip into place. * a.People b.Equipment c.Environment     Do not work alone so that there is someone who can take care of you in case of an accident or emergency.  a.People b.Equipment c.Environment