Dynamic NAT Dynamic NAT will be configured on R5

Subject:Computer SciencePrice: Bought3

Share With

Dynamic NAT Dynamic NAT will be configured on R5. Use interface fa0/0 for the outside and interface fa1/0 for the inside. . Do not propagate the IPv4 network for the Dynamic NAT PC through the network. . Use 10 as the number for your ACL for dynamic NAT. Make sure that you specify only the Dynamic NAT PC with this ACL. Use the name Dynamic for the name of the pool. Use the address range of 210.103.105.6 - 210.103.105.10/27 for the pool. To check if your NAT configurations are working correctly, type in the following command on R1, R4, and R5: show ip nat translations